Wednesday, March 11, 2009

tapered sanding blades

Amateur box maker, Dr. Nestor Demianczuk, asked about the availability of tapered sanding disks like I have used in my early books, Creating Beautiful Boxes with Inlay Techniques and Simply Beautiful Boxes. He has used flat blades for the purpose but found that they tend to cause friction burns on the stock as the sandpaper loads up.

My original tapered sanding disk came from Sears, but as far as I know they are no longer available. I have also used a flat blade successfully by moving it over to engage the wood in gradual increments. As Dr. Demianczuk has noted, if you try to take off very much at once, the leading edge of the disk loads up quickly and can make friction burns on the stock, so the trick is to lighten the load, taking smaller increments. A tapered blade would be very easy for a manufacturer to make, and a flat sanding blade could be adapted to a slight taper very easily by a modern machine shop. Hopefully, some enterprising manufacturer will again make tapered sanding blades, as they can be useful to box makers. In the meantime, flat sanding blades are offered by Woodcraft.com

2 comments:

Gary in San Diego said...

Tapered sanding disks for the table saw are available from Woodworker.com

http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=95-430

fitzhugh said...

These are standard shopsmith accessories as well. They are great for jointing type work as well as sharpening planer and jointer blades. Not cheap, but if you have the metal disk you simply replace the conical paper so over time it costs less (assuming you sand a lot, and have a shopsmith or some other way of spinning the disk. Spinning on your finger like a frisbee won't cut it.)

I know this is an old post, but I'm reading through your site having just found it.
Thanks for the effort you've put into this.